Go Back   AUSubaru.com Forums > Workshop > Conversions, modifications and performance



Reply
 
Thread Tools Display Modes
  #1  
Old Sun 13th August 2006, 03:35 PM
robdddd robdddd is offline
Gold Subscriber
New member
 
Join Date: Apr 2006
Location: Perth (WA)
Posts: 137
robdddd
EJ22 to EA82 Alternator wiring

Help required wiring up the alternator from an EJ22 into an EA82 L series sports wagon.

The following is what I think I have worked out and would like some comments:

(A_A) EJ22 small Black/White wire connects to EA82 White/Red to the warning lamp on the dash

(B_B) Two large White EJ22 wires one from the plug and one from the bolt connection which connect together will get connected to the EA82 main wire heading to the fusible link.

(C_C) Single large white EJ22 wire from the bolt on connection connects to the EA82 Black/White wire heading to the fusible link (note, is it a concern that the EJ2 wire is much larger than the EA82?)

The Green and white wire I have no idea, does not show up on any wiring diagrams I have, the yellow wire from the diagram I have was on a 90-94 liberty only went to a diode and the ignition coil and then main fuse box (DONíT THINK I NEED TO CONNECT THESE?)

Thanks

rob
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +10. The time now is 12:24 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.