|
|
|
#1
Fri 5th February 2010, 09:42 AM
|
||||
|
||||
front tyre scrubbing......
hi guys i just picked up my brumby the other day and ive noticed if i turn the wheels to the right the right one scrubs but not the left.... and if i take off a bit quick the right tyre scrubs again even in a straight line..... grrr... i wanna lift it but i cant find any lift kits and the apparently the bloke on here that does em his mum is crook.... so if i can figure out whats going on i might be able to sort it out before i lift it...
cheers brumbybear
__________________
Im looking for a cheap second hand 2-4" lift kit for my brumby... if u have one pm me plz 
|
|
#2
Fri 5th February 2010, 10:26 AM
|
|||
|
|||
|
a front wheel alignment candidate, but that ain't worth it unless ball joints and tie rods and rack ends are in good order. Castor rod bushes, anything bent?
__________________
Never argue with idiots, they just drag you down to their level and then beat you with experience Brumby quadthrottle quadrazontal EA81 LPG 5 speed "Portland" 4WDiscs GLTM 5 speed 4WD L Sedan EA82T LPG 36mm turbo orifice under snail better low end squirt than the 42mm version surely the prostate could have been placed in a more palpable spot like next to the appendic watching the nights getting longer .... http://www.ci.westport.wa.us/index.html
|
|
#3
Fri 5th February 2010, 10:45 AM
|
||||
|
||||
|
im getting under it this arvo and going to go over it all i reckon.. Mmmm i hope it isnt any thing too serious...
__________________
Im looking for a cheap second hand 2-4" lift kit for my brumby... if u have one pm me plz
|
|
#4
Fri 5th February 2010, 01:50 PM
|
||||
|
||||
|
more than likely its those horrible plastic mudflaps on the front pull em off and see if there is any difference
otherwise its the plastic surround under the guard or as I call them the the mud collectors/ rust creators two points to consider the bottom of the front of the guard and the bottom of the back of the guard where it bolts on to the body in the red areas on the picture below is where I have had the most rubbing  TOONGA
__________________
|
|
#5
Fri 5th February 2010, 01:55 PM
|
||||
|
||||
|
thanx for that toonga ill check it out shortly when i get outside
__________________
Im looking for a cheap second hand 2-4" lift kit for my brumby... if u have one pm me plz
|
|
#6
Fri 5th February 2010, 03:33 PM
|
||||
|
||||
|
Quote:
__________________
rtcb65 ------------------ Redneck Rick. 1982 Wagon,2" lift, 14" rims running 27" tires. central locking , alarm , etc. The more M.Y.s the better. 
|
|
#7
Tue 9th February 2010, 01:28 PM
|
||||
|
||||
|
well i have pulled out the plastic inner guards on both sides and it still scrubs.... plenty of clearance inside guards..... could a wheel bearing or CV be the cause of the noise??
cheers brumbybear
__________________
Im looking for a cheap second hand 2-4" lift kit for my brumby... if u have one pm me plz
|
 |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
