View Single Post
  #3  
Old Thu 28th November 2013, 08:52 PM
phil nelis's Avatar
phil nelis phil nelis is offline
Gold Subscriber
New member
 
Join Date: Aug 2010
Location: collingwood park qld
Posts: 99
phil nelis is on a distinguished road
The only problem is you must make sure the centre hole in the rim is only 94mm so that when it fits onto the wheel studs it also sits flush on the locating lugs on the hubs otherwise all the load is only supported by the wheel studs. I have speedy style sunraisers on my car and they have a 107mm centre hole so i made some hub rings to suit.
Reply With Quote